Biopharmaceuticals, genetic research, tissue fragmentation, cell pulping, case analysis, oil-water emulsification, nanomaterial dispersion, dairy homogenization, polymerization reaction, daily cosmetics, ink coatings, fine chemicals, pesticides, prospecting, environmental protection, energy and other fields.
1. The appearance design is lightweight, meets ergonomic requirements, and can be operated with one hand;
2. Different dispersion heads are suitable for liquid samples of 0.1-50mL, 1-150mL or 1-250mL;
3. Adjustable speed range: 8000-32000rpm;
4. High-quality 316L stainless steel dispersion head, corrosion-resistant, high-temperature resistant and sterilizable;
5. The dispersion head is easy to disassemble and clean.
Model | LD-160 |
Speed | 8000-32000rpm |
Maximum linear speed of rotor | 6.3m/sec (dispersing head DS-160/5) or 14m/sec (dispersing head DS-160/10) |
Speed setting | 10 levels |
Sample volume range | 0.1-50ml (dispersing head DS-160/5) | 1-250ml (dispersing head DS-160/10) |
Maximum viscosity | 5000 mPa·s |
Contact material | SS316L stainless steel, PTFE |
Noise | 72 dB(A) |
Enclosure protection level | IP20 |
Motor type | AC Carbon Brush Motor |
Power | 160W |
Power supply | 110-120V/60Hz，220-240V/50-60Hz |
Dimensions [L x W x H] | 45x55x190mm |
Weight | 0.54kg |
Permitted ambient temperature | 0-40℃ |
Permitted relative humidity | 85% RH |
